PricesOrder FormOptionsTipsFAQ'sShippingColor ChartReference ChartWarrantyContact Us
Our Seat Galleries
BMW Gallery
Honda Gallery
Kawasaki Gallery
Harley-Davidson Gallery
Suzuki Gallery
Yamaha Gallery
Moto Guzzi Gallery
Victory Bike Seats
Specialty Bikes Gallery
Sport Bike Gallery


In April 2008 Russell Cycle Products purchased our own foam processing machine. We named it "The Foaminator".
The unit was custom built for us...Learn More>>





Embroidery Designs


What Our Customers Say:
"Just e-mailing you to let you know how much we are enjoying our seat, it sure has made a big differerence in our riding comfort. We wish we would have done it ten years ago. The wife and I both love it!"
James & Carolyn Peacock

"After 1200+ miles on my 1200RT I can say this saddle is without question the best farkle I have ever spent my hard earned $$ on. Thank you so much for rescuing my backside. I have owned Corbin, Sargent and Mustang, all good seats but really there is no contest."
Linc Gurley

"Having researched at length the "custom" motorcycle seat market, I had high expectations when I recently ordered my Russell Day-Long saddle. I am pleased to report that your saddle has exceeded my expectations! At 6'5" and 270 pounds, motorcycle seats have always been the weakest link in my attempts as comfort; however the fit, comfort, and quality of your-my Day-Long is superb!"
Phil "SickDog" Mowers

Read More Testimonials>>





Introducing The Foaminator!

That Was Then...The Foaminator
For years Russell Cycle Products has depended on outsourcing our foam saddles that we incorporate our Support Suspension System into. With no control over the finished product we were at times sent useless saddles that were to hard , to soft, or inconsistent in density. This led to many problems when it came time to balance foam density with suspension system tension. The marriage of foam and suspension system is complex to achieve the Day-Long comfort we are famous for.

This Is Now...
In April 2008 Russell Cycle Products purchased our own Foam processing machine shown in the picture. We named it "The Foaminator". The unit was custom built for us to meet the need to precisely pour the exact gram weight saddle for each individual Day-Long custom seat. By controlling the gram weight we can in turn control the multiple density's required for total Day-Long comfort We can now calculate to a higher degree the proper gram density per customers weight factor. The processing has exceeded our expectations and we feel the comfort levels have greatly improved.

Here at Russell Cycle products we are constantly working to achieve the ultimate comfort levels. We believe this investment will move us one giant step forward in achieving that goal. As we always say "No two are alike".